5th Axis Trunnion Tables
TT182
| Model | TT182/TW182 | TT200 | ||
|---|---|---|---|---|
| Tilting Angle Range | -35°～+110° | -35°～+110° | ||
| Table Diameter (mm) | ø180 | ø200 | ||
| Centre Hole Diameter (mm) | ø65H7 | ø65H7 | ||
| Through Hole Diameter (mm) | ø40 | ø40 | ||
| Centre Height (mm) | 180 | 180 | ||
| Clamping Method | Air-hydraulic / Hydraulic | Air-hydraulic / Hydraulic | ||
| Clamping Torque (N･m) (at pneumatic 0.5MPa /hydraulic 3.5MPa) |
Rotating axis | 450 | 600 | |
| Tilting axis | 800 | 1200 | ||
| Motor Axis Reduced Inertia (kg･m2) | Rotating axis | 0.000242 | 0.000225 | |
| Tilting axis | 0.000135 | 0.000125 | ||
| Servomotor (for Fanuc spec.) | αiF 2/5000-B | αiF 2/5000-B | ||
| Total Reducion Ratio | Rotating axis | 1/90 | 1/90 | |
| Tilting axis | 1/180 | 1/180 | ||
| Max. Rotation Speed (min-1) |
Rotating axis (at motor 3000min-1) |
33.3 | 33.3 | |
| Tilting axis (at motor 3000min-1) |
16.6 | 16.6 | ||
| Allowable Work Inertia (kg･m2) | 0.25 | 0.3 | ||
| Indexing Accuracy (sec) | Rotating axis | 20 | 20 | |
| Tilting axis | 60 | 60 | ||
| Repeatability (sec) | 4 | 4 | ||
| Mass of Product (kg) | 163 / 178 | 170 | ||
| Allowable Load | at horizontal (kg) | 60 | 60 | |
| at tilted (kg) | 40 | 40 | ||
180mm diameter faceplate suitable for 4th and 5th axis machining.
- Spindle Through Hole Dia: 40mm
- Centre Height at verticality: 180mm
- Tilting Angle: -35°~+110°
- Repeatability: 4sec
Brochures
