Thread Grinding
0550 EXTERNAL THREAD GRINDER
| Max Diameter Admitted | 150 mm | |||||||
| Max Diameter Ground | 100 mm | |||||||
| Min Diameter Ground | 5 mm (Component Dependent) | |||||||
| Max Length Between Centres | 500 mm | |||||||
| Max Length of Thread Ground Between Centres | 400 mm (Component Dependent) | |||||||
| Lead Range | 300 mm | |||||||
| Work Head: (C Axis) | ||||||||
| Work Head Torque | 46 Nm | |||||||
| Work Speed Range | 0.4 to 120 RPM | |||||||
| C Axis Resolution | 0.001⁰ | |||||||
| Wheel Head: | ||||||||
| Spindle Power | 8.8 Kw @ 2000 RPM | |||||||
| Automatic Balancing | Integral Dynamic Balancing Unit | |||||||
| Helix Capacity (A Axis) | ± 45⁰ | |||||||
| Capacity (Z Axis) | ||||||||
| Table Slide Travel | 540 mm | |||||||
| Table Slide Position Resolution | 0.0001 mm | |||||||
| Table Slide Traverse Speed | 0 – 7 M/Min | |||||||
| Capacity (X Axis) | ||||||||
| Wheel Head Slide Travel | 290 mm | |||||||
| Wheel Head Position Resolution | 0.0001 mm | |||||||
| Wheel Head Slide Traverse Speed | 0 – 7 M/Min | |||||||
| Wheel Dressing Unit: | ||||||||
| Work Head Mounted | Fixed | |||||||
| Variable Speed | 0 ~ 6000 RPM (Bi-Directional) | |||||||
| Dressing Feed Rate | Programmable | |||||||
| Control System: | ||||||||
| CNC System | Siemens 840 DE Solution Line | |||||||
| System Specification | PCU50.5 | |||||||
| User Interface | Siemens HMI Advanced Software | |||||||
| 8″ Colour TFT Screen | Resolution 640 x 480 Pixels | |||||||
| Operating & Programming | Matrix Advanced Programming | |||||||
| Machine – Physical: | ||||||||
| Approx Gross Machine Weight | 6500 Kg | |||||||
| Approx Machine Floor Area | 3800 mm x 3500 mm | |||||||
| NOTE: These capacities are subject to inevitable restrictions, depending upon wheel head, Helix Angle, Work Holding, and Support Equipment. | ||||||||
|---|---|---|---|---|---|---|---|---|
The 0550 Device is a machine designed with matrix profile software and coolant system. This system is built with grinding wheel and diamond disk that are inclusive.
This unit's standard features include an automatic wheel balancing, and a motorised wheel head. The machine also has a set of absolute encoders that are fitted on all configured axes. It features a matrix ProfileMATE software.
Brochures
